Products Description
Features:
842A electric dual-use suction tin sucker has a beautiful appearance, easy to suck tin. It can be used to take the components off the circuit board while not damaging the components and circuit boards. It is specially used for the replacement of integrated circuits and multi-foot switch. The suction tin sucker can be used as a general electric iron. It is an essential tool for the defense, scientific research, communication, aerospace, computer, radio, television, electronic professional maintenance personnel and the majority of radio enthusiasts.
Instructions:
1. It uses 220V 50Hz power supply with 30W power;
2. Turn on the power, preheating for 3-5 minutes;
3. Push down the piston handle, point the tin suction nozzle at the soldering part; after tin has melted, press the control
button, the solder is sucked into the cylinder;
4. Tin suction device is equipped with two different diameter suction nozzles, depending on the thickness of the component lead;
5. When welding, the same operation as the soldering iron;
6. When disassembling the cylinder, press down the top of the cylinder according to the direction of the arrow, pull the cylinder and the handle apart at the same time, and the cylinder can be separated out; when disassembling the suction nozzle, spin it counterclockwise and remove it;
Notes:
1. Check whether the voltage is consistent, too high or too low voltage is not conducive to use;
2. Before using, spin the cylinder and the suction nozzle tight to prevent leakage. Otherwise it will affect the suction.
3. Clear the solder impurities in the suction nozzle and the cylinder frequently, and add a little oil to the piston;
4. Everytime after using, push the piston 3-4 times to remove the residual straw for suction nozzle and straw's next smooth use;
5. Suction tin device is strictly prohibited to install and remove part of its electric parts when powered on.
6. It's normal that there is slightly smoke due to heating when the first time to use the new tin suction pump. It will naturally disappear after ten minutes.
7. When using, a natural cooling soldering iron base must be equipped and the suction pen should be placed in the iron base.
8. If the power cord is damaged, to avoid danger it must be replaced by the manufacturer or maintenance department or similar full-time personnel.
9. This product has a ground wire which should be used along with a socket with contacts. Please pay attention for safety.
Included:
842A electric dual-use suction tin sucker has a beautiful appearance, easy to suck tin. It can be used to take the components off the circuit board while not damaging the components and circuit boards. It is specially used for the replacement of integrated circuits and multi-foot switch. The suction tin sucker can be used as a general electric iron. It is an essential tool for the defense, scientific research, communication, aerospace, computer, radio, television, electronic professional maintenance personnel and the majority of radio enthusiasts.
Instructions:
1. It uses 220V 50Hz power supply with 30W power;
2. Turn on the power, preheating for 3-5 minutes;
3. Push down the piston handle, point the tin suction nozzle at the soldering part; after tin has melted, press the control
button, the solder is sucked into the cylinder;
4. Tin suction device is equipped with two different diameter suction nozzles, depending on the thickness of the component lead;
5. When welding, the same operation as the soldering iron;
6. When disassembling the cylinder, press down the top of the cylinder according to the direction of the arrow, pull the cylinder and the handle apart at the same time, and the cylinder can be separated out; when disassembling the suction nozzle, spin it counterclockwise and remove it;
Notes:
1. Check whether the voltage is consistent, too high or too low voltage is not conducive to use;
2. Before using, spin the cylinder and the suction nozzle tight to prevent leakage. Otherwise it will affect the suction.
3. Clear the solder impurities in the suction nozzle and the cylinder frequently, and add a little oil to the piston;
4. Everytime after using, push the piston 3-4 times to remove the residual straw for suction nozzle and straw's next smooth use;
5. Suction tin device is strictly prohibited to install and remove part of its electric parts when powered on.
6. It's normal that there is slightly smoke due to heating when the first time to use the new tin suction pump. It will naturally disappear after ten minutes.
7. When using, a natural cooling soldering iron base must be equipped and the suction pen should be placed in the iron base.
8. If the power cord is damaged, to avoid danger it must be replaced by the manufacturer or maintenance department or similar full-time personnel.
9. This product has a ground wire which should be used along with a socket with contacts. Please pay attention for safety.
Included:
1 X Electric Tin Suction Sucker
1 X PCB Board Nozzle Cleaner
1 X Replaceable Nozzle
1 X PCB Board Nozzle Cleaner
1 X Replaceable Nozzle
Packaging & Shipping
Delivery Detail: 5workdays after confirm the order.
Delivery for larger items or items sent direct from our suppliers may take longer. or customer`s requirements.
Shipping: By sea or air or express company is OK, that depend on customers demand.
Delivery for larger items or items sent direct from our suppliers may take longer. or customer`s requirements.
Shipping: By sea or air or express company is OK, that depend on customers demand.
Shipping Way | Shipping Time | Advantages&Disadvantages |
DHL/UPS/FEDEX/TNT | 3-5 Days Tracking Number Available in 2 | fast, a little expensive |
Air Shipping 5-8 | 5-8 Days | Fast, customers have to clear the custom by themselves |
Sea Shipping | 15-30 Days | Cheap, slow, customers have to clear the custom by themselves |
Our Services
1.Our campany is located in Yiwu China Commodity Market(Yiwu wholesale market), largest Commodities Market in the world,so we have
the newest and abundant resource of goods
2.We have years of experience as international professional trader
3.So we can offer best service ,highest quality and lowest price by using abundant market resource and years of trading
experience.
4.OEM and ODM orders are welcome
the newest and abundant resource of goods
2.We have years of experience as international professional trader
3.So we can offer best service ,highest quality and lowest price by using abundant market resource and years of trading
experience.
4.OEM and ODM orders are welcome
Company Information
FAQ
1. We can make samples according to your design, style, sample, logo or labels. For customized samples, it requires some sample
charges and freight collect. The sample charge is returnable after placing the order on or exceed the minimum quantity.
2. The goal of any strong brand is achieve a level of awareness that instills the idea of quality and value into all of your
potential customers.
3. We always strive to bring our customers the best possible offers and deals whilst ensuring to operate fair commercial practices
without misleading our customers.
4. We're dedicated to providing the quickest turnaround times and work very Hard to ensure that all of your deadlines are met.
charges and freight collect. The sample charge is returnable after placing the order on or exceed the minimum quantity.
2. The goal of any strong brand is achieve a level of awareness that instills the idea of quality and value into all of your
potential customers.
3. We always strive to bring our customers the best possible offers and deals whilst ensuring to operate fair commercial practices
without misleading our customers.
4. We're dedicated to providing the quickest turnaround times and work very Hard to ensure that all of your deadlines are met.
Contact
Yiwu Sino E-Business Firm
Website: http://sensovip.en.alibaba.com/
Skype:sensowell
WhatsApp:008613957937557
Wechat: 008613957937557
Mobile : 008613957937557
QQ:2749476977
Website: http://sensovip.en.alibaba.com/
Skype:sensowell
WhatsApp:008613957937557
Wechat: 008613957937557
Mobile : 008613957937557
QQ:2749476977
Call Us
Trading Company
|
≤14h
Response Time
The average amount of time supplier took to respond to every buyer’s first message over the past 30 days.
|
|
|
80,000+ for 145 Transactions
The supplier’s transactions conducted via Alibaba.com in the past 6 months.
|